Fenix Process Technologies Pvt. Ltd. FENIX Process Technologies

FXPack – Structured Packing

Structured Packing- Sheet Metal (FXPack)
  • FXPack 60.0L/M
  • FXPack 1.0L/M
  • FXPack 1.25L/M
  • FXPack 1.70L/M
  • FXPack 2.0L/M
  • FXPack 2.5L/M
  • FXPack 3.5L/M
  • FXPack 5.0L/M
  • FXPack 7.5L

Key Characteristics:

  • Sheet Metal Structured Packing Sizes varies from: 25 mm to 12 m diameter.
  • Surface Area: 60 to 1000 m2/m3
  • F-Factor: 1.2 to 3.5
  • NTSM: 1.0 to 4.5
  • MOC: Stainless Steeel, 904L, 254SMO, Duplex, SS410s, Titanium, Hastalley, Inconel etc.
  • Application: Sheet Metal Structured packing used for Standard application, Moderate vacuum to high pressure, Low to high liquid loading.

Structured Packing - Wire mesh (FXPack WM)
  • FXPack WM5.0M
  • FXPack WM7.5L

Key Characteristics:

  • Wire mesh Structured Packing Sizes: 25 mm to 3.0 m diameter.
  • Surface Area: 500 to 750 m2/m3
  • F-Factor: 1.5 to 2.2
  • NTSM: 6.0 to 9.0
  • MOC: Stainless Steel, Phosphor bronze, or any metal/alloy according to customer request.
  • Application: Wire mesh Structured Packing used for High vacuum to low pressure, Good for where low pressure drop required, High number of stages per meter, highly efficient even at low liquid loading.

High Capacity Structured Packing (FXPack SUPER)
  • FXPack *SUPER 250
  • FXPack SUPER 350
  • FXPack SUPER 450
  • FXPack SUPER 600
  • FXPack SUPER 750
  • FXPack SUPER 1000
  • FXPack SUPER WM 500
  • FXPack SUPER WM 600
  • FXPack SUPER WM 750
  • FXPack AL SUPER WM 500 (for aqueous application)

Key Characteristics:

  • High capacity structured packing Sizes varies from: Up to 8.0 m diameter.
  • Surface Area: 250 to 1000 m2/m3
  • F-Factor: 2.2 to 3.0
  • NTSM: 2.2 to 5.0
  • MOC: Stainless Steels, 904L, 254SMO, Monel, Hastelloy, or any metal/alloy according to customer request.
  • Application: High capacity structured packing for high liquid loading, high Vapour loading, useful for heat sensitive systems, very low pressure drop.

Structured Grid Packing
  • FXGrid 45L
  • FXGrid 60L/M
  • FXGrid 90L/M

Key Characteristics:

  • Structured grid packing sheet thickness is varies from: 1.0 – 2.0 mm
  • MOC: Stainless Steels, 904L, 254SMO, Monel, Hastelloy, or any metal/alloy according to customer request.
  • Application: Structured grid packing for high liquid loading, high Vapour loading, useful for heat sensitive systems, very low pressure drop.

Laboratory Packing
  • FXLab-EM
  • FXLab-DM
  • FXLab-DMPlus

Key Characteristics:

  • Laboratory packing used diameter is in range of 25-100 mm
  • NTSM: 20-40
  • MOC: Stainless Steels or others on request.
  • Application: laboratory packing suitable for heat-sensitive systems, where pressure drop low, suits low liquid load 0.05m2/m3h,can be used for high vacuum to 2 mbar, can be scaled up easily, pressure drop low 0.1 to 0.4 mbar/stage.

Knitted Structured Packing
  • FXLab-KM12
  • FXLab-KM8

Key Characteristics:

  • MOC : Stainless Steel, others on request.
  • Application : Separations where high no of theoretical stages are required due to its high efficiency.
  • Heat sensitive materials such as fine chemicals, flavors & fragrance, pharmaceutical intermediates due to lower pressure drop by this packing.

Reactive Distillation Packing
  • FXReact-SM
  • FXReact-WM

Key Characteristics:

  • Reactive distillation packing used in diameter: 50-500 mm
  • Surface Area: 150 to 450 m2/m3
  • NTSM: 1.0 to 3.0
  • MOC: According to customer request.
  • Application: Reactive distillation packing for high separation efficiency, reaction capacity/rate can be high, flexible design of catalyst element; can be used in laboratory packing.

PTFE Structured Packing

PTFE Structured Packing refers to a range of specially designed materials for use in absorption and distillation columns and chemical reactions. PTFE Structured Packing typically consist of thin corrugated PTFE sheets arranged in a way that they force fluids to take complicated paths through the column, thereby creating a large surface area for the contact between different phases.

  • FXPack PTFE

Key Characteristics:

  • Sizes: 100 mm to 300 mm
  • Application: Corrosive Systems
  • Temperature: Upto 150°C
  • It is completely chemically inert material
  • PTFE Structured Packing is strong but light in weight.
  • PTFE Structured Packing gives rise to adequate passages for both Gas & Liquid streams without excessive liquid hold up or pressure drop.
  • PTFE Structured Packing provides a good contact between liquid and gas.
  • PTFE Structured Packing is washable and reusable.
  • PTFE Structured Packing is unbreakable too.
  • PTFE Packing are energy conserving

Other- Grid Packing
  • FGG 25
  • FXGrid – 3

Key Characteristics:

  • MOC: Stainless Steels, SS410S, Duplex, Monel, Hastelloy, Carbon steel, or according to customer request.

Liquid – Liquid Extraction Packing

Fenix has been providing liquid-liquid extraction equipment and solutions using structured packings, random packings. Extraction finds is most suitable applications when the material to be separated is non-volatile or heat sensitive and when it is not possible to separate by distillation or evaporation.

LLE Packing
  • FXExtract 2.0
  • FXExtract 2.5
  • FXExtract 3.0

Key Characteristics:

  • Liquid Liquid Extraction Packing available upto 3m diameter
  • MOC: Stainless steels, Carbon steel, or any metal/alloy according to customer request.
  • Application: Liquid Liquid Extraction Packing is specially designed packing combination made from sheet metal for liquid-liquid extraction.